Dependent on the size of room and contamination level, Please call for a
recommendation.
The Crystal Air ozone generator should be properly sized for the specific
area and number of possible smokers. The Ozone generator should be hooked into
the air handling system in order to ensure proper distribution. (The Ductzone is
designed to be mounted on the ductwork or if higher output in required, mounting
brackets are available for the PRO 3600, 5000, & 10000). An ozone controller
should also be used in order to ensure safe levels are not exceeded.
If a controller is not used (not recommended) adjust Crystal Air ozone
generator so that the ozone or the problem odor can not be detected. Begin with
the ozone generator on low setting and work your way up slowly. One person
should be in charge of adjusting the ozone generator output as the contamination
increases or decreases. If ozone is set for 40 smokers and 30 vacate, then the
ozone generator should be adjusted to lower setting, otherwise the air will
become excessively ozonated and possibly cause sore throat or headache.
